Film/Sheet Die
100mm wide coat hanger style film die with fine gap adjustment and adjustable concave/convex flexible upper lip. Made from hard anodised heat-treatable aluminium tool steel.
Please contact us for specific product features.
1/ TO ADJUST GAP
- Slightly loosen the side plates and Thickness Plate screws, then relieve the Fine Adjustment Screw tension in the Upper Lip adjustment
- To ensure that the Thickness Plate is parrallel and square to the Die Body use feeler gauges to set the gap in the positions shown in product brochure.
- Check the extrusion gap thickness with feeler gauge
2/ FINE ADJUSTMENT
- Using a 5mm alen key adust the upper lip
- Do not adjust the Upper Lip more than 0.5mm in each direction (1/2 Turn = 0.5mm)
- Turning the screws anticlockwise will lower the lip (reducing gap), Clockwise will raise the lip
Please contact us for product dimensions.